See just released high quality promotional videos HERE

Hegner Scroll Saw Models and Specifications

(Note: This brochure site devoted to Hegner Scroll Saws is a companion site for our site at The Wood Works Book & Tool Co from where we manage the distribution and customer support for Hegner machines across Australia. You can use the links in this site to progress to purchasing and further information).

Hegner manufacture 7 models of scroll saw from the Multicut 1 through to the industrial-use Polycut. The build quality does not vary across the range with an unrivalled attention to precision, the use of plastics only when their use is merited and a legendary record of reliability and spare parts support. We routinely supply spares for the maintainance of machines with in excess of 25 years use.

Multicut 1 (fixed speed) Item Code: M0239 Multicut 1e (variable speed) Item Code: M0240 Multicut 1e FS ( with footswitch variable speed) Item Code: M0240FS

SPECIFICATIONS Models 1 and 1e Shipping Weight 20 kg Machine weight 16 kg Warranty 3 years Length 520mm (20 inches) Width 270mm (11 inches) Throat 365mm (14 inches) Max Cut 50mm (2 inches) Blades Pinless 130 mm (5 inch) Table Machined alloy Table size 435mm x 230mm (17" x 9") Table tilt 0~45 degrees Quick Arm Tension Release Yes at Rear Quick Blade Clamp No (accessory) Indicative Noise At Idle 64.1 dB(A) Indicative Noise Machining 74.5 dB(A) Dust management Dual - bellows blower & vacuum port Stroke Two options - 12 & 18mm Ex Factory Stroke Setting 18mm Speed Fixed (Model 1) 1400 spm Speed Variable (Model 1e) 400~1400 spm Motor 100 Watts (230v, 50Hz, AC) Motor Type (Model 1) TEFC Cap start continuous duty Motor Type (Model 1e) TEFC VS drive continuous duty Motor rating Continuous Indicative Capacities Soft Wood 50mm Hard Wood 40mm Alloy, Copper, Brass, Silver 5mm Hard plastics, perspex 15mm Polyurethane foam 50mm

Multicut 2S (fixed speed) Item Code: M0241 Multicut 2Se (variable speed) Item Code: M0242 Multicut 2Se (footswitch variable speed):  Item Code: M0242FS

SPECIFICATIONS Models 2S and 2Se Shipping Weight 22 kg Machine Weight 19kg Warranty 3 years Length 610mm (24 inches) Width 280mm (11 inches) Throat 460mm (18 inches) Max Cut 65mm (2 1/2 inches) Blades Pinless 130 mm (5 inch) Table 2S & 2Se Machined alloy Table size 435mm x 230mm (17" x 9") Table tilt 12 ~ +45 degrees Quick Arm Tension Release Yes at Front Quick Blade Clamp Yes Indicative Noise At Idle 64.1 dB(A) Indicative Noise Machining 74.5 dB(A) Dust management Dual - bellows blower & vacuum port Stroke Two options - 12 & 19mm Ex Factory Stroke Setting 19mm Speed Fixed (Model 2S) 1400 spm Speed variable (Model 2Se) 400~1400 spm Motor 100Watts (230v, 50Hz, AC) Motor Type (Model 2S) TEFC Cap start continuous duty Motor Type (Model 2Se) TEFC VS drive continuous duty Motor rating Continuous Indicative Capacities Soft Wood 65mm Hard Wood 50mm Alloy, Copper 5mm Brass, Silver 10mm Iron soft steel 8mm Hard plastics, perspex 15mm Polyurethane foam 65mm

Multicut 2SE   Item Code: M0243 Multicut 2SE (footswitch variable speed) Item Code: M0243FS

SPECIFICATIONS Model 2SE Shipping Weight 28kg Machine Weight 23 kg Warranty 3 years Length 610mm (24 inches) Width 280mm (11 inches) Throat 460mm (18 inches) Max Cut 65mm (2 1/2 inches) Blades Pinless 130 mm (5 inch) Table Machined cast iron Table size 435mm x 230mm (17" x 9") Table tilt 12 ~ +45 degrees Quick Arm Tension Release Yes at Front Indicative Noise At Idle 64.1 dB(A) Indicative Noise Machining 74.5 dB(A) Quick Blade Clamp Yes Dust management Dual - bellows blower & vacuum port Stroke Two options - 12 & 19mm Ex Factory Stroke Setting 19mm Speed Fixed 1400 spm Speed variable 400~1400 spm Motor 100Watts (230v, 50Hz, AC) Motor Type TEFC VS drive continuous duty Motor rating Continuous Indicative Capacities Soft Wood 65mm Hard Wood 50mm Alloy, Copper 5mm Brass, Silver 10mm Iron soft steel 8mm Hard plastics, perspex 15mm Polyurethane foam 65mm

Multicut Quick   Item Code: M0244 Multicut Quick (footswitch variable speed): M0244FS

SPECIFICATIONS Model Multicut Quick Shipping Weight 29 kg Machine Weight 32 kg Warranty 3 years Length 730mm (29 inches) Width 280mm (11 inches) Throat 560mm (22 inches) Max Cut 65mm (2 1/2 inches) Blades Pinless 130 mm (5 inch) Table Machined cast iron Table size 435mm x 230mm (17" x 9") Table tilt 12 ~ +45 degrees Quick Arm Tension Release Yes at Front Indicative Noise At Idle 64.1 dB(A) Indicative Noise Machining 74.5 dB(A) Quick Blade Clamp Yes Dust management Dual - bellows blower & vacuum port Stroke Two options - 12 & 19mm Ex Factory Stroke Setting 19mm Speed variable 400~1400 spm Motor 100Watts (230v, 50Hz, AC) Motor Type TEFC VS drive continuous duty Motor rating Continuous Indicative Capacities Soft Wood 65mm Hard Wood 50mm Alloy, Copper 5mm Brass, Silver 10mm Iron soft steel 8mm Hard plastics, perspex 15mm Polyurethane foam 65mm

Polycut 3   Item Code: M0245

SPECIFICATIONS Note: Illustrated with a hold down arm which is an optional extra. Purchase HERE POLYCUT Model Polycut 3 Shipping Weight 45 kg Machine Weight 37 kg Warranty 3 years Length 675mm Width 365mm Throat 500mm (20 inches) Max Cut 50mm (2 inches) Blades Pinless 130 mm (5 inch) Table Machined cast iron Table size 490mm x 260mm (17" x 10") Table tilt 0 ~ 45 degrees Quick Arm Tension Release Yes at Back Indicative Noise At Idle 64.1 dB(A) Indicative Noise Machining 74.5 dB(A) Quick Blade Clamp Yes Dust management Dual - bellows blower & vacuum port Stroke Two options - 14 & 24mm Ex Factory Stroke Setting 24mm Speed Control Belt drive Speeds Fixed 700, 1100, 1270, 1600 spm Motor 180Watts (230v, 50Hz, AC) Motor Type TEFC Cap start continuous duty Motor rating Continuous Indicative Capacities Soft Wood 50mm Hard Wood 50mm Alloy, Copper 15mm Brass, Silver 10mm Iron soft steel 8mm Hard plastics, perspex 40mm Polyurethane foam 50mm